Quilled Project 10: Papa's Birthday and Belated Father's Day Gift

My father's b'day gift! His birthday was on 22nd September and I was a little late in preparing this for him since I had my exams till 17th September. So finally I was able to finish it yesterday and presented it to him today!

I wanted to make his gift on the similar lines as my Maa's Mother's Day gift so that both will go with each other (see it here). So decided on quilled typography. I chose the word PAPA as it is supposed to be his Father's Day gift too ( I know, I know I am freakishly late but then I have my surgery and my exams to blame for it)

The BG is same as that on my mom's gift (so that both gifts compliment each other). I chose my Papa's favorite colours to do the quilling. White is his utmost favorite, so decided to do it in white. Apart from white, his favorite colours are Blue and Grey. So used a dash of other two colours so that the whole look doesn't get monotonous (pun intended :-P)

Still need to frame it though....

Entering it in IQCG # 20 - White on White. 

Quilled Project 9: A Photoframe

Quilling Project 8: Mother's Day gift for my Maa

My Maa, my creator, a woman of substance. Only if I could be even 10% of what she is. Her stamina and caliber to perform 24 x 7 in her office as well as at home amazes me. She is a perfect blend of a working woman and a homemaker. The way she has balanced office life and personal life, the way she has always been the perfect daughter, daughter-in-law, sister, sister-in-law, mother, aunt and played all the other roles of a woman in a family one can think of, the way she has made a special niche for herself in the world and in the hearts of everyone who knows her, is beyond my comprehension. She taught me the essence of scientific temperament and helped me to be who I am today. Her ceaseless support and encouragement is all that I need.  I can never run short of words to define her but yes, the space would definitely be less to write those words.

On this Mother's Day, I decided to make a gift for her, a unique one and which can symbolize what she means to me. So I decided to make a quilled Mandala.Let me explain you what Mandala is. Mandala (Circle) is a spiritual and ritual symbol in Hinduism and Buddhism, representing the Universe. 

For me, my Maa (mother) is the the very center of my Universe. My whole world revolves around her. When ever I am ecstatic about anything, I share it with my mother. If I am in doubt, I always turn to her for guidance and when sad, a little motivation and encouragement from her sends my spirits right up again. I have written the name with which I call her (it's written like this ' माँ ' in hindi) in the very center of the Mandala representing my Universe.

The colors that I have used to make the mandala are the primary colors, Red, Blue and Yellow. Any color which you will ever see in the entire universe is made by these primary colors itself. 

Just like my Maa is my creator, the primary colors are the creators of the entire color spectrum of the Universe. And this is what choice of these particular colors in my Mandala symbolizes.

The base of this layout is a 10" x 10" cardboard covered with white, wrinkled hand-made paper. I have made my Mandala so that the base forms a rhombus shape when held straight. 

When me and my bother presented this to my Maa as a gift, she immediately understood the logic that I had used while making it and the choice of colors! Amazing!  Needless to say that she just loved it! 

Now I will soon get it framed and will put it up on the wall of my parent's bedroom. I am already thinking of making something for my Papa which will compliment this artwork and which I will present it to him on Father's Day! 

I am entering this artwork in IQCG # 16 ----- 1, 2, 3 Recipe. To elaborate my artwork according to the challenge, I have made 1 Mandala using 2 shades each of 3 primary colors. (Shades of the quilling strips from inner circle to outer circle are Light Red, Dark Velvet Red, Light Yellow, Bright Yellow, Soft Blue and Ocean Blue)

PS: I won the IQCG # 16 ----- 1,2,3 Recipe! Thanks IQCG team!

Quilling Project 7: For a SHONA baby!

I made this special photo-frame/layout for one of the most adorable baby boy I have ever met. He is the sweetest answer to my very close friend's uncountable prayers. She endured lot of pain, heartache and agony during past couple years because of some misfortunes but her patience was rewarded with such a beautiful blessing, her baby boy!!!

This is what I had made as a gift for the new Mom when I was going to meet her baby boy for the first time. I wanted to remind her that God has perfect timing; never early, never late. It takes a little patience and a lot of faith. But it's always "WORTH THE WAIT". I chose all the elements related to her newly born baby and to welcome her in the realm of motherhood.

The picture I chose to use in this photo-frame/layout was the first picture she had sent to me of her boy. He is just a couple of hours old in this picture. Although he is already three months old when I first met him a few days ago, but judging by comparison of this first pic of his and our first tête-à-tête', he is quickly growing up to be a handsome boy! Mashallah! He is as cute as a button, so I have used buttons in my creation to signify this! I have used bunting to signify the celebration of my friend's first step into motherhood. Two little hearts signify the love and affection of the little baby's mom and dad. And of course, there are a lot of baby related items like pram, bib, pacifier, feeding bottle, rattler, nappy pin and his two little, tiny feet!!!!

Here is a close-up of some elements. Little white patches that you see in the picture below is still-wet glue which had later vanished when it dried.

I added a little stand at the back so that this photo-frame/layout could stand on it's own.

My friend and her hubby were so thrilled to receive this gift! May Allah always shower his choicest blessing on them and may the baby and parents be always happy and healthy! Ameen.

Entering this creation in Try It On Tuesday's New Beginnings challenge and in Create Something Catchy's Anything Goes challenge.

Quilling Project 6: Birthday gift for my chaddi buddy Niharika

It was my chaddi buddy Niharika's birthday this month. She is not only my friend but also one of the biggest patrons of my creativity. She has always supported me, encouraged me and pushed me to indulge more and more in various art forms. She is the one who gave me the most memorable birthday gift this year, a huge, colossal stock of crafting supplies!!! 

I wanted to gift her something special too. Something she might cherish all her life while at the same time will show my gratitude for everything she has done for me. So I decided to make a jewellery box for her in shape of a birthday cake!

I made it entirely out of handmade paper using cardboard only as the cake base. The walls of the box and the cover is made of only handmade paper. I have used the kind of handmade paper which she had introduced me to (click here to know the story), the quilling strips and paper doily are from the stock which she gave me on my birthday.

A lot of elements of this box were inspired by Lulupu's March 2015 moodboard:

The soft pastel colors of my box were inspired from pastel colors of the french macarons, wreath and the pic of the photoframe.

The flowers on my box were inspired by the flowers in the vase.

The idea of making a "Birthday Cake" shape of the box and the quillography on my box were inspired by the Happy Birthday sentiment in the mood board. Of course, there are no birthday celebrations without a birthday cake.

The idea of doing the number 31 in white color was inspired by the digit 3 in the moodboard.

There are a number of ways in which I have included number "3":

  1. Luckily it was Niharika's 31st birthday so no. 3 itself was included.

  2. I have used only 3 colors, blue, white and pink.

  3. I have made 3 sets of 3 flowers each. 

I am entering it in IQCG # 14 - Box It Up! I am also entering this creation in Lulupu's 3rd Birthday special challenge to celebrate her birthday and to honor her patronage of my creativity! WISH YOU A VERY HAPPY BIRTHDAY GIRL! Wishing happy birthday to Lulupu too! May both of you celebrate many more birthdays in future and have lots of success!!!

PS: This creation of mine is chosen to be one of the toppers in IQCG # 14 - Box It Up!

Quilling Project 5: Wedding gift for my Crazy, Fun-loving, Beautiful Friend Gunjan!

Ah! Here comes another wedding gift. This time for a lovely friend of mine, Gunjan! Remember the quilled artwork for her sister-in-law which I made on special order from her? (click here to see it)

Gunjan's wedding was in December 2014 but due to certain reasons I could not complete the gift in time. But being a doll that she is, she patiently waited, giving me all the time in the world to complete it. However I had completed it way before in January, but only a couple of days ago I got the opportunity to present it to her and her wonderful husband. So rather than being their wedding gift, it turned out to be their 3rd- month-wedding-anniversary gift! Hehehehe....Sorry for being so late Gunjan.

Here is what it looks like:

Without framing

With framing (sorry for such a poor pic)

I had ideas of two different designs floating in my head for her gift. I discussed them with her as I wanted to make something according to her liking. We finally choose the one with the wedding knot as she simply loved her gorgeous wedding dress and it's unique, out-of-ordinary, lovely and bright colors. I had to actually order my raw material (quilling strips) precisely to match the colors of her chunni as I was trying to get almost-as-exact-as-possible replica of her chunni design. Of course, I made the groom's patka in my artwork to be almost-as-exact-as-possible replica of his actual patka design too!

Gunjan's Chunni design

Groom's patka design

I also wanted to try something new for their date of wedding. So I tried making numbers and words by connecting tight rolls. I am glad that turned out to be beautiful! I fist thought of writing the complete "December" but then decided against it as I wanted their names to be prominent and also I wanted the date to have a different, not-so-ordinary style of writing!

Their wedding took place after a long bout of convincing, compelling and pacifying their parents to bless their love. Finally they both emerged as winners and their love overcame all the obstacles. Drenched in each others' color, they both tied the auspicious knot, along with the blessings of their elders. I have done the name of the bride in colors used for groom's patka and groom's name in the colors of bride's chunni to signify this.

The size of the completed artwork (without frame) was approximately 2 ft. x 1.5 ft. Gunjan explicitly wanted a big size for her home decor. Here is picture of the artwork while under process which shows a 12 inch scale with which you might get the idea of it's size. Please forgive the messy look. 

Picture showing rough estimation of the size of the artwork

This is how it looks on the wall of her house.

Please leave some love if you liked it.
If you want me to do similar artwork for you, please contact me here.

Disclaimer: I had sent the pictures of this particular artwork to some of my cousins and friends over watsapp and one of them told me about a similar work done by artist Suganthi and send me the link of her post. I was stunned by how similar my artwork is to her and was mesmerized by how wonderful it looked, how amazing, owing to the fact that she had done it so neatly when the size of her artwork is only the size of A4.
However,  I just want to let everyone know that my artwork is NOT inspired by her. It is the result of my imagination alone. The design, the size, the layout of my artwork varies a great deal than Suganthi's. However, it is stunning how two entirely different people, unknown to each other may conceptualize such similar ideas and give similar physical form to their imagination.

Entering this creation in Try It On Tuesday's New Beginning challenge.

Mixed Media - Project 1: Maa Papa's Anniversary 2015 Gift (with tutorials !)

Today is 13th March 2015,  it's my Maa and Papa's 33rd Marriage Anniversary! I make gifts for my friends and relatives, so there isn't a possibility in all of the universe (universes, if you believe in multi-verses) that I won't make one for my parents' anniversary.

It's their "33rd Marriage Anniversary" and normally wedding anniversaries have some symbol connected to them like 25th has Silver and 50th has Gold, but 33rd doesn't have any traditional symbol associated with it. I had already decided that whatever I am going to make for them will be related to, or inspired by the symbol for 33rd anniversary to mark it special. So I searched and found out that there is a new Modern-Day list of symbols for almost all anniversaries and only the 33rd Wedding Anniversary has a modern-day symbol as "Amethyst".

Amethyst is a gemstone (a violet variety of quartz) which comes in various shades of purple, from lightest lavender to dark, reddish purple. Sometimes this purple, translucent stone has white or green inclusions also (however, honestly I was absolutely not aware of this fact about inclusions till I started to write this post and had a chance discovery of this fact when I had to look for how to describe Amethyst! Will tell you later why it is important.)

Anyways, so I decided to make a layout for them and take this opportunity to try my hand in making a mixed media project for the first time.

So here is the Amethyst-inspired 33rd Wedding Anniversary gift for my parents:

Let me give you a tour of the whole layout and I will tell you how I created these individual elements.

First of all, I had a rough idea as to what will be the color combination of my creation, that being purple and white (green was not even in my mind at the time when I conceptualized it or even when I started working on it). 

The fabric lace and purple rhinestone:

I added rhinestones as an afterthought, sort of replica of Amethyst gemstones!

The Sentiment:

I decided to highlight my sentiment with a frame around it. First I stamped a flower wreath using black ink on white cartridge paper. Since I do not have any acrylic block for stamping, I used a clear plastic box. I stuck the stamp at the base of the box, covered it with ink. I left the lid of the box open and then stamped it on paper by dancing my fingers inside the box, over the stamp to give an even pressure. Well , it is true when people say that necessity is the mother of invention!!!

Ooh I love the detailing on this stamp!

But I wasn't satisfied with the plain white color, so I colored it with pencil colors. Here again I tried couple of times to decide the look that would go with my layout. Finally I decided to color all the flowers in the stamped image with purple and all leaves with 2 shades of green, dark and light! Finally I cut the stamped image out and removed the inner blank portion as well, making it look like a frame. I pasted a small strip of purple pastel paper at the back of the image and wrote the sentiment with Pearl White 3D outliner. I used foam tape to raise them off the BG.

The purple and white flowers:

I started by making quilled roses with strips of different shades of purple. But after making just one quilled rose, I realized that this won't do because I need bigger flowers for my layout. I had come across flowers made out of paper spirals a long, long time back and I had wanted to make them ever since. So I decided that this is what I am going to do to make flowers. However, to make these, neither could I use die cutting machines or dies (as I don't have either of them) nor could I get it printed (as I had no idea how many would I need). So I tried to make a couple of them using trial-and-error method with scissors. I wanted my flowers to have look of petals therefore, rather than using simple scissors, I used my fancy ones. 

After a few tries, I came up with a proper way to make these flowers which I am sharing with you. If like me, you don't have dies and die cutting machines or cannot get template of these flowers anywhere, you can use this simplest of methods to make these gorgeous flowers. And the pros of using this method is that you need very few basic supplies like pencil, eraser, paper and scissor; you can play with a lot of variations in your flower like you can decide the color of the flower, you can play with the size of the flower, you can make the flower as dense as you want! And, of course, you can minimize the amount of waste paper. And they just look fabulous in 3D. Without further rambling, lemme give you the tutorial for it.

Cut a square out of the paper

Start drawing a spiral from the middle of the square

Finish the spiral at the outer edge of the square

With light hand, erase the pencil marks so that only
 a trace is left on your paper and no pencil marks
are visible in your flower

Now cut along the trace of the spiral . Start from the outer edge
and finish with the middle of the spiral 

You will get something like this

If you are someone like me, you will keep the rest of the waste
paper to be used in some other way in some other project.

Fix the outer edge of the spiral in the slot of quilling needle 

Now with the help of quilling needle, 
start rolling the spiral from outer edge

Once you complete rolling the spiral around needle and
reach the middle of it, put glue at the base of all
the layers to fix it

Let the glue dry and you flower is ready

The numbers:

These were hand-drawn and cut out of the same paper which I used as BG. To highlight them , I mounted them over shimmery white handmade paper and roughly cut it out in oval shape. But still they looked very plain so I used purple rhinestones to add some bling and they just looked perfect instantly.  Then I used foam tape to raise them off BG. 

The photo- corners:

Using the same paper as BG, I stamped a flourish on it with Versamark watermark ink. I then sprayed pearly white Perfect Pearls on the stamped image to add more shimmer. I added another layer of white handmade paper beneath the purple one and painted the edge of purple with pearl white acrylic paint.

The quote:

Got the quote printed out on a normal photocopy paper and cut it out. Then I pasted it on BG and highlighted it using silver metallic paint pen.

The leaves:

When I finally added all the elements, I still thought something is off about it, it didn't quite looked complete. I pondered over it for a long time and then it stuck me! The green petals in the stamp were looking a bit off and odd one out since they did not have anything else on the whole layout to go it. And the flowers were looking a bit plain and laid back. Then I got this idea! Why not add leaves to the flowers as it will add the pop to the whole layout due to contrast and will also compliment the colors in the stamped image linking it more with the layout. I wanted leaves to be 3D like flowers and of same two shades as used in the stamp and luckily I found both the color papers in my stash. Here is a small tutorial on how you can make them too. Remember how earlier I told that I wasn't aware of the Amethyst having inclusions? What a co-incidence is this that I had decided to add this particular color to go with my purple and white theme! Now it is indeed truely Amethyst inspired! (however I came to know about the colors of the inclusions in Amethyst way after I completed and presented it to my parents!!!) :-D

Roughly draw outline of a leaf on paper

Cut it out

Now score along the mid rib of the leaf

If you don't have a score tool like me,
use the back of the paper knife to do the scoring

Now draw the veins of the leaf with a sketch pen

Minutely fringe the edges of the leaf with scissor

Now fold the leaf gently along the
scored midrib to give it a 3D effect

I made leaves in 2 shades of green,
the same shades I used in coloring the stamped image

Finally I mounted the whole layout on a cardboard covered with white photocopier paper. I also made a stand for it at the back.

My parents were so happy to get this as a gift! And if they are happy, I am happy too! 

Tea light candle stand for Papa,
their previous anniversary gift from my brother

Tea light candle stand for Maa,
their previous anniversary gift from my brother

This year's gift standing between the candles,
you can see the soft glow of the tea light at the lower right potion of the layout

They suggested me to enter this creation in a challenge. I am linking it to:

Beyond Grey Challenge: Mixed media challenge - I used, fabric, memento ink, watermark ink, metallic silver paint, perfect pearls, pearly white acrylic paint, rhinestones, pearls, sketch pens, color pencils, handmade paper, pastel paper, cartridge paper as different mediums in this project.

Try it on Tuesday: Pearls for Girls challenge.

Cheers!